[Oct 30, 2023] HPE2-T37 Exam Dumps 100% Same Q&A In Your Real Exam
HPE2-T37 Test Engine Dumps Training With 81 Questions
NEW QUESTION # 26
You are deploying HPE OneView to manage a customer's HPE ProLiant servers Is this statement about appliance availability true?
- A. HPE OneView has a built-in HA feature that can be activated with an additional license
- B. During hpe oneView deployment customer may select configure proprietary HA mode.
- C. HPE OneView availability relies on HA features provoed by the hypervisor
- D. HA features for HPE OneView are enabled only if the appliance is deployed on an HPE SimpliVity cluster
Answer: C
NEW QUESTION # 27
Which statement about an HPE OneView server profile is true?
- A. A server profile can be used to update firmware and drivers when the operating system on the server is up and running.
- B. A server profile can be used to configure a local storage controller, but cannot be used to configure SAN-based storage.
- C. A server profile can be created only for HPE BladeSystem, HPE Synergy, and HPE Superdome Flex servers.
- D. A server profile created for a specific server hardware type cannot be moved to a server with a different server hardware type.
Answer: B
NEW QUESTION # 28
Click the option from the HPE OneView main menu that will allow you to define UPS or other components that will work as a placeholder in a rack system.
Answer:
Explanation:
NEW QUESTION # 29
Refer to the exhibit.
After adding SAN Manager to HPE OneView. you noticed that all SANs are in the discovered state. How will this affect HPE OneView storage management capabilities?
- A. Auto-zoning functionality will not work until SANs are associated with networks.
- B. Snapshot functionality will be limited only to the volumes not using these SANs.
- C. Volume provisioning will only work for arrays that ate accessible through these SANs.
- D. Volume presentation through server profile will work with the discovered state.
Answer: D
NEW QUESTION # 30
Your customer is considering HPE Synergy as a hardware platform for visualization workload. The customer environment is wry dynamic, and they often have to modify hypervisor networking.
Which resource provided by HPE should you discuss with this customer?
- A. PowerShell Library for HPE OneView allows scripted environment modification.
- B. HPE Image Streamer provides templates which can be updated to map the hypervisor requirements
- C. HPE OneView Global Dashboard allows server profile replication and change management.
- D. HPE OneView for VMware vCenter Server will enable host profile functionality and simplify changes.
Answer: B
NEW QUESTION # 31
Which statement about an HPE OneView server profile is true?
- A. A server profile created for a specific server hardware type cannot be moved to a server with a different server hardware type.
- B. A server profile can be used to update firmware and drivers when the operating system on the server is up and running.
- C. A server profile can be created only for HPE BladeSystem, HPE Synergy, and HPE Superdome Flex servers.
- D. A server profile can be used to configure a local storage controller, but cannot be used to configure SAN-based storage.
Answer: A
NEW QUESTION # 32
Your customer is considering HPE Synergy as a hardware platform for visualization workload. The customer environment is wry dynamic, and they often have to modify hypervisor networking.
Which resource provided by HPE should you discuss with this customer?
- A. HPE OneView for VMware vCenter Server will enable host profile functionality and simplify changes.
- B. PowerShell Library for HPE OneView allows scripted environment modification.
- C. HPE OneView Global Dashboard allows server profile replication and change management.
- D. HPE Image Streamer provides templates which can be updated to map the hypervisor requirements
Answer: A
NEW QUESTION # 33
A customer wants to estimate the cost of the licenses required to manage HPE Synergy and some external components When component includes an HPE OneView license for management?
- A. Storage Array
- B. Logical Enclosure
- C. Master Module
- D. Compute Module
Answer: D
NEW QUESTION # 34
What is required to add remote frame link topology to HPE OneView?
- A. Multi-site licenses must be added to HPE OneView and activate for all available HPE Synergy frames.
- B. Management ports of the remote frame link topology must be connected to the management LAN.
- C. The HPE OneView certificate from the primary site must be added to HPE OneView in the remote site.
- D. The IP address assigned to HPE Composer installed in a remote site must be registered in a primary site.
Answer: A
NEW QUESTION # 35
Which statement about a Logical Enclosure for HPE BladeSystem is Hue?
- A. A logical enclosure can contain a mix of HPE BladeSystem c7000 and C3000 enclosures.
- B. A logical enclosure can have between 1 to 5 HPE BladeSystem c7000 enclosures.
- C. A logical enclosure is created automatically, and it is always based on a single enclosure.
- D. A logical enclosure must be created only for monitored HPE BladeSystem C700O enclosures.
Answer: C
NEW QUESTION # 36
A customer has to deploy 21 HPE Synergy Compute Modules in a boot from SAN setup. How this task can be simplified while keeping the profile consistent?
- A. Boot volumes can be created on demand and defined in the server profile template.
- B. An existing volume can be replicated automatically when creating a server profile.
- C. Boot volumes can be prepared in advance and later presented as shared volumes to the Compute Modules.
- D. single SAN volume can be created and utilized by all HPE Synergy Compute Modules.
Answer: A
NEW QUESTION # 37
Which operation can be performed using HPE OneView for VMware vCenter Server?
- A. Remove a new node from an existing cluster
- B. Create a new VMware cluster within vCenter Server
- C. Configure VMware cluster properties tor HA and DRS
- D. Create a new distributed switch for cluster connectivity
Answer: A
NEW QUESTION # 38
Your customer asks you if it is possible to perform HPE Synergy initial setup remotely. How should you respond?
- A. HPE Synergy can be configured remotely through a secure connection to the FLM if this option was enabled In the factory.
- B. HPE Synergy cannot be deployed remotely, as Initial setup must be performed using a local console connection.
- C. Remote HPE Synergy Installation can be done only if an additional set of the services was purchased together with hardware platform.
- D. Remote HPE Synergy setup is possible if HPE Composer 2 is used and a DHCP server Is available in the management network.
Answer: A
Explanation:
HPE Synergy 4-port Frame Link Modules have SFP+ ports which enable connections to distant frames and remote subnets.
NEW QUESTION # 39
What is the best practice when deploying an HPE OneView appliance?
- A. Deploy two HPE OneView appliances and configure them in HA mode.
- B. deploy the appliance in a hypervisor cluster that Is not managed by OneView.
- C. Use thin-provisioning for the HPE OneView appliance to save storage capacity.
- D. Enable VMware Fault Tolerance if the appliance is deployed to a VMware hypervisor.
Answer: B
NEW QUESTION # 40
Refer to the exhibit.
Your customer created multiple networks in HPE OneView, but only Eth-1 is available to be used within a server profile. What is a likely cause of this situation?
- A. The other networks have Private Network' selected, which hides them from Compute Modules.
- B. The other networks are not configured with the required Smart Link parameter.
- C. The other networks are not added to the Logical Interconnect Group configuration.
- D. The other networks are configured with a purpose other than General or Management.
Answer: C
NEW QUESTION # 41
You want to update the firmware for only two HPE Synergy Virtual Connect SE 32Gb FC Modules of a large environment. From which level must this procedure be initiated?
- A. Logical Enclosure
- B. Server Profile
- C. Logical Interconnect Group
- D. Logical Interconnect
Answer: A
NEW QUESTION # 42
Your customer plans to monitor HPE ProLiant DL systems and HPE BladeSystem using HPE OneView Which license is required to accomplish this task?
- A. HPE OneView standard license
- B. HPE OneView Advanced license
- C. HPE composer 2 license
- D. HPE One View Global Dashboard license
Answer: A
NEW QUESTION # 43
You have created volumes using array management tools and imported the volumes to HPE OneView.
Which statement about these volumes is true?
- A. Volumes imported to HPE OneView is managed just like a volume created using HPE OneView
- B. A snapshot for imported volumes can be created only by using array management tools
- C. Volumes imported to HPE OneView cannot be removed using the HPE OneView interface
- D. Imported volumes are treated as private volumes and can be only used as boot volumes
Answer: D
NEW QUESTION # 44
Which statement about logical JBODs configured using KPE OneView and D3940 Storage Modules is true?
- A. Logical JBOD functionality must be enabled on the Enclosure Group level by a storage administrator
- B. A logical JBOD lifecycle can be associated with a server profile lifecycle and drives can be securely erased.
- C. A logical JBOD cannot be created during server profile creation and must be prepared in advance
- D. Different types of the drives can be used within a logical JBOD as long as they have the same capacity
Answer: C
NEW QUESTION # 45
What is required to add remote frame link topology to HPE OneView?
- A. The HPE OneView certificate from the primary site must be added to HPE OneView in the remote site.
- B. Multi-site licenses must be added to HPE OneView and activate for all available HPE Synergy frames.
- C. Management ports of the remote frame link topology must be connected to the management LAN.
- D. The IP address assigned to HPE Composer installed in a remote site must be registered in a primary site.
Answer: C
NEW QUESTION # 46
You want a server profile to be automatically applied when an HPE Synergy Compute Module is replaced.
Click the appropriate configuration option.
Answer:
Explanation:
NEW QUESTION # 47
Click the option that will allow you to disable virtual MAC addresses or generate a new pool of virtual Worldwide Names.
Answer:
Explanation:
NEW QUESTION # 48
You ate implementing an HPE Synergy solution with multiple frames in one management ring. Image Streamer is not a part of this solution. How can an IPv4 address pool defined by the administrator be used In HPE OneView?
- A. to provide static IP addresses to IL0 and interconnect modules if applicable
- B. to provide static IP addresses for Logical Interconnects and Logical Enclosures
- C. to provide static IP addresses for storage systems managed in HPE OneView
- D. to provide static IP addresses for an operating system running on a Compute Module
Answer: D
NEW QUESTION # 49
You want to add the latest IL0 firmware to an HPE OneView firmware repository. How can you complete this task?
- A. ILO firmware can be marked as a hotnx and uploaded directly to the Internal or external firmware repository.
- B. A PowerShell script must be used to upload IL0 firmware to the Internal or external firmware repository.
- C. A custom SPP iso Image must be created with the new IL0 firmware version and uploaded to the repository.
- D. An external repository must be created, because standalone components are supported only In an external repository.
Answer: D
NEW QUESTION # 50
......
HPE2-T37 Practice Test Pdf Exam Material: https://passking.actualtorrent.com/HPE2-T37-exam-guide-torrent.html