The Best Practice Test Preparation for the C-IBP-2205 Certification Exam
C-IBP-2205 Exam Dumps, Practice Test Questions BUNDLE PACK
NEW QUESTION 25
You need to define a new logic for a key figure to drive values from the PERPRODCUSTREGION level to the PERPRODCUST level. Which of the following configuration options are possible for this process?
Note: There are 2 correct Answers to this question.
- A. Splitting the values from aggregated to detailed level based on stored split-factor key figure
- B. Splitting the values from detailed to aggregated level by using copy operator
- C. Splitting the values from aggregated to detailed level using multiplication by the proportions
- D. Splitting the values from aggregated to detailed level based on time profile attribute
Answer: A,C
NEW QUESTION 26
Which of the following are examples of time-independent key figures?Note: There are 2 correct answers to this question.
- A. A currency conversion key figure, such as exchange rate
- B. A unit of measure key figure, such as UOMCONVERSIONFACTOR
- C. A special key figure marked as an aggregate key figure (aggregate constraint)
- D. A forecast metric key figure, such FCSTMAPE
Answer: B,C
NEW QUESTION 27
You are reviewing the master data types for supply planning. Which master data types are compound master data types? Note: There are 2 correct Answers to this question.
- A. sourcelocation
- B. SOURCEPRODUCTION
- C. SOURCECUSTOMER
- D. LOCATIONFR
Answer: A,C
NEW QUESTION 28
You are adding a value-based filter to a planning view.Which of the following conditions apply?Note: There are 3 correct answers to this question.
- A. The alerts dashboard is not available if a value-based filter is set for the open planning view.
- B. You can add (or delete) planning objects to a planning view after these filters are applied.
- C. These filters are always applied based on the values stored in the database.
- D. These filters can be used together with attribute totals in the same planning view.
- E. You can only apply one value-based filter per planning view.
Answer: A,C,E
NEW QUESTION 29
What are some of the properties of filter blocks?Note: There are 3 correct answers to this question.
- A. Filter blocks can be visualized in the Key Figure Calculations app.
- B. Filter blocks are imposed when modeling attribute transformations.
- C. Filter blocks are imposed when modeling cross-period calculations.
- D. Filter blocks can be visualized in SAP IBP, add-in for Microsoft Excel
- E. Filter blocks are imposed when modeling an attribute as a key figure.
Answer: B,D,E
NEW QUESTION 30
You need to make manual adjustments to your S&OP plan.Which are possible ways of making these changes?Note: There are 2 correct answers to this question.
- A. Using Microsoft Excel planning views
- B. Leveraging the web-based planning capability
- C. Using Driver-Based planning
- D. Leveraging the functionality of SAP Workzone
Answer: A,B
NEW QUESTION 31
You are configuring disaggregation for the KF1 key figure. Which methods can you apply? Note: There are 3 correct Answers to this question.
- A. Disaggregation according to a user-defined expression
- B. Proportional disaggregation by using KF2 in the expression
- C. Disaggregation in batch triggered by an application job
- D. An internal system-generated disaggregation
- E. Disaggregation according to an equal split
Answer: A,B,E
NEW QUESTION 32
Analytics charts are created by the user in the Advanced Analytics application.What can the user do in the Advanced Analytics app?Note: There are 2 correct answers to this question.
- A. Open graphics in Excel.
- B. Apply filters on your data.
- C. Merge charts together.
- D. Group data.
Answer: B,D
NEW QUESTION 33
You are working to realign the data due to a recent warehouse closure. What should you be aware of in regards to configuration of realignment steps? Note: There are 2 correct Answers to this question.
- A. The realignment step status must be set to In Review for it to be executed.
- B. The number of steps in realignment run is limited to 255.
- C. The name of the realignment step should be no longer than 20 characters.
- D. If a realignment step fails, subsequent steps are not processed.
Answer: A,D
NEW QUESTION 34
For your project, you create a new planning area and consider how to create analytics and alerts for it.How can you create these objects?
- A. Merge analytics and alerts into a new planning area from any sample planning area.
- B. Use the option for copying analytics and alerts when creating a new planning area from the sample SAPIBP1.
- C. Create analytics and alerts in the new planning area from scratch using the Intelligent Visibility application.
- D. Use the option for copying analytics and alerts into the new planning area from the existing custom planning area.
Answer: B
NEW QUESTION 35
You want to maintain key figure values for a new attribute and value combination, using SAP IBP, Add-in for Microsoft Excel, and are receiving an error related to missing combinations.How can you resolve this problem?Note: There are 2 correct answers to this question.
- A. Use the Manage Master Data app to create the combinations
- B. Use the Check Mode operator to create the combinations
- C. Use the Data Integration app to load suitable data that creates the combinations
- D. Use the option New Planning Object in the SAP IBP, add-in for Microsoft Excel
Answer: A,C
NEW QUESTION 36
A time profile is defined with these levels: day, technical week, week, month, quarter, and year. What condition in configuration will allow you to have a different value in the current week, versus all other time buckets?
- A. IF("PERIODID5" ="$$PERIODID5CU$$...)
- B. IF("PERIODID2" ="$$PERIODID2CU$$...)
- C. IF("PERIODID4" ="$$PERIODID4CU$$...)
- D. IF("PERIODID3" ="$$PERIODID3CU$$...)
Answer: C
NEW QUESTION 37
Which of the following approaches could you take to reduce run times of an optimizer?Note: There are 3 correct answers to this question.
- A. Avoid using telescopic time buckets.
- B. Keep the number of fairshare segments small.
- C. Use non-overlapping networks by using subnetwork ID maintained at Location-Products to reduce the size of the problem.
- D. Increase the use of incremental lot size beyond the frozen horizon.
- E. Split into multiple planning areas to support weekly vs. daily planning needs.
Answer: A,C,E
NEW QUESTION 38
You are modeling a substitution scenario associated with a promotion. What are some of the Master Data parameters that you need to maintain to ensure desired results generated by the optimizer? Note:
There are 2 correct Answers to this question.
- A. Loc-Prod Subst Valid-From Date
- B. Flag 'Disable Substitution of Location Products
- C. Promotion duration
- D. Location Product Sub Cost Rate
Answer: A,C
NEW QUESTION 39
Forecast Error CV is an input to which of the following?
- A. Time-Series-Based Supply Planning Optimizer
- B. Calculate Target Inventory Components in Inventory Planning Profile Operator
- C. Multistage Inventory Optimization in Inventory Planning Profile Operator
- D. Forecast Error Calculation in Inventory Planning Profile Operator
Answer: C
NEW QUESTION 40
The S&OP Operator Profiles app is used to configure different types of algorithms.Which algorithm-specific settings are unique for only the Time Series-based Supply Optimizer?Note: There are 2 correct answers to this question.
- A. Global cost factors
- B. Time profile level
- C. Discretization
- D. Processing mode
Answer: A,D
NEW QUESTION 41
You need to create time periods for the time profile in a planning are
a. What should you be aware of when executing the Create Time Periods application job?
- A. A time profile has to be activated so that the application job can proceed.
- B. This application job can be run for multiple time profiles at once.
- C. This application job cannot be scheduled for immediate start.
- D. The planning area with this time profile must be activated so that the application job can proceed.
Answer: D
NEW QUESTION 42
You have set up a planning area and data is available. You adjust the necessary time profile settings and run the consistency check. Which settings can you change and still run a successful consistency check?
Note: There are 2 correct Answers to this question.
- A. Change the description of the attributes in the time profile.
- B. Change the past and future horizon of the levels in the time profile.
- C. Add a new time profile level to the time profile.
- D. Remove an attribute assigned to the time profile level if the attribute is used in a planning level.
Answer: A,B
NEW QUESTION 43
......
SAP C-IBP-2205 Exam Syllabus Topics:
| Topic | Details |
|---|---|
| Topic 1 |
|
| Topic 2 |
|
| Topic 3 |
|
| Topic 4 |
|
| Topic 5 |
|
SAP C-IBP-2205 Exam Description:
The "SAP Certified Application Associate - SAP IBP for Supply Chain (2205)" certification exam verifies that the candidate possesses the basic knowledge in the area of the SAP supply chain planning. This certificate proves that the candidate has a basic overall understanding within this consultant profile of the industry solutions, and can implement this knowledge practically in projects under guidance of an experienced consultant. It is recommended as an entry-level qualification to allow consultants to get acquainted with the fundamentals of SAP Integrated Business Planning. Please note that this 2205 version of the exam takes part in the Stay Current with SAP Global Certification program. Once you pass this version of the exam, make sure that you start your stay current process. You will be required to take the quarterly stay current assessment for all subsequent SAP IBP releases via the SAP Learning Hub starting with the 2205 release to maintain your SAP IBP consultant certification status and badge. In order to participate in the stay current program and access the stay current enablement and assessment, you will need at minimum an SAP Learning Hub, edition for IoT and Digital Supply Chain subscription. (https://training.sap.com/learninghub)
Prepare for the Actual SAP Certified Application Associate C-IBP-2205 Exam Practice Materials Collection: https://passking.actualtorrent.com/C-IBP-2205-exam-guide-torrent.html