Valid 352-001 Test Answers & Cisco 352-001 Exam PDF
Cisco 352-001 Certification Real 2022 Mock Exam
For more info visit:
How much 352-001 Exam Cost
The price of the 352-001 exam is $150 USD.
NEW QUESTION 61
A BGP route reflector in the network is taking longer than expected to converge during large network changes.
Troubleshooting shows that the router cannot handle all the TCP acknowledgement during route updates.
Which action can be performed to tune the device performance?
- A. increase the keepalive timers for each BGP neighbor
- B. Decrease the size of the small buffers.
- C. increase the size of the large buffers
- D. increase the size of the hold queue
Answer: D
Explanation:
Explanation
https://www.ciscopress.com/articles/article.asp?p=2738462&seqNum=2
NEW QUESTION 62
Refer the exhibit.
You have designed a IPv6 migration plan, and now you need to determine the impact on the existing IPv4 network. Which is likely to happen when you enable IPv6 routing on the link between R3 and R2, starting at R3?
- A. All routers except R2 are reachable through IPv4.
- B. R2 receives an IPv6 default route from R3.
- C. Only R3 and R2 have IPv4 and IPv6 reachability.
- D. R3 advertises the link from R3-R2 to R1, R4 and R5 only.
- E. Loopback reachability between all routers for IPv4 is lost.
Answer: E
NEW QUESTION 63
Your company is designing a service provider network management solution in which customers are billed for 95th percentile network utilization. The service provider requires that an IETF standard be utilized to collect the data. Which method should be used to collect the data?
- A. IPFLOW
- B. IPFIX
- C. NETFLOW
- D. NBAR
- E. RMON
Answer: B
Explanation:
Explanation/Reference:
Explanation:
NEW QUESTION 64
A Mobile Service Provider would like to design and deploy an Ethernet service which has similar physical link failover/failback characteristics on the active/backup links as the APS/MSP SONET properties. Which Layer 2 services should be considered to address this design feature?
- A. Port-Channel
- B. Ethernet Pseudowires
- C. Flex Link
- D. MLPPP
Answer: C
NEW QUESTION 65
Refer to the exhibit.
Your junior design engineer presents this configuration design. What is the next-hop router for CE3, and why?
- A. CE1. BGP weight is higher than CE2.
- B. CE1. HSRP on CE1 is in active state.
- C. CE2. EBGP administrative distance is lower than RIP.
- D. CE2. The link between CE2 and PE1 has more bandwidth than CE1-to-PE1.
Answer: A
Explanation:
Explanation/Reference:
Explanation:
NEW QUESTION 66
You are designing a NAC OOB Layer 3 Real-IP Gateway deployment for a customer. Which VLAN must be trunked back to the Clean Access Server from the access switch?
- A. untrusted VLAN
- B. authentication VLAN
- C. management VLAN
- D. user VLAN
Answer: A
NEW QUESTION 67
Four routers running IS-IS are connected to a single Ethernet link. Then, a fifth router is connected, which has a priority higher than any of the other routers connected to the network.
What will happen?
- A. The new router will not be elected DIS unless it has the lowest NET I
- B. The new router will not be elected DIS unless the current DIS fails.
- C. The new router will become the DIS without causing a temporary disruption in traffic through the link.
- D. The new router will become the DIS and cause a temporary disruption in traffic through the link.
Answer: C
NEW QUESTION 68
The headend router propagates which two resources for constrained based path computation with MPLS Traffic Engineering? (Choose two.)
- A. link jitter
- B. average link utilization
- C. link delay
- D. link bandwidth and link affinity
Answer: D
Explanation:
Section: (none)
Explanation/Reference:
NEW QUESTION 69
ACME Corporation is integrating IPv6 into their network, which relies heavily on multicast distribution of data. Which two IPv6 integration technologies support IPv6 multicast? (Choose two.)
- A. IPv6INIP
- B. 6PE
- C. dual stack
- D. ISATAP
- E. 6VPE
- F. 6to4
Answer: C,F
NEW QUESTION 70
Which of these statements accurately describes MPLS-based L3VPN service?
- A. It is independent of the routed protocol.
- B. It offloads routing between sites to the service provider.
- C. It improves routing protocols and network convergence.
- D. It allows for transparent routing across the service provider.
Answer: B
NEW QUESTION 71
A green data center is being deployed and a design requirement is to be able to readily scale server virtualization. Which IETF standard technology can provide this requirement?
- A. fabric path
- B. data center bridging
- C. unified fabric
- D. Transparent Interconnection of Lots of Links
Answer: D
NEW QUESTION 72
What are three key design principles when using a classic hierarchical network model? (Choose three.)
- A. A hierarchical network design facilitates changes.
- B. The core layer should be configured with minimal complexity.
- C. The core layer controls access to resources for security.
- D. The core layer is designed first, followed by the distribution layer and then the access layer.
- E. A hierarchical network design model aids fault isolation.
- F. The core layer provides server access in a small campus.
Answer: A,B,E
NEW QUESTION 73
A large service provider offers VoIP and Video services to business customers. Which three areas should the service provider monitor related to these services? (Choose three.)
- A. jitter
- B. packet loss
- C. availability
- D. latency
- E. service response time
- F. bandwidth utilization
Answer: A,B,D
NEW QUESTION 74
You are the lead IP/MPLS network designer of a service provider called XYZ. You are leading a design discussion regarding IPv6 implementation in the XYZ MPLS network, using MPLS 6PE/6VPE techniques.
Currently, XYZ provides IPv4 multicast services over an MPLS network by using MVPN, and would like to provide parallel IPv6 multicast services. Which three multicast solutions should be enabled? (Choose three.)
- A. native IPv6, only for multicast services
- B. an overlay model using Layer 2 MPLS tunnels
- C. MVPN for IPv6 multicast service
- D. MPLS 6PE/6VPE, because it provides IPv6 multicast support by default
- E. PIM-DM to enable IPv6 multicast in conjunction with MPLS 6PE/6VPE
Answer: A,B,C
Explanation:
Explanation/Reference:
Explanation:
NEW QUESTION 75
Refer to the exhibit. The operations team has identified that some of the multi-tiered e-commerce applications have slow performance, due to illegitimate inbound traffic from the Internet. On which network device do you place traffic filtering to improve performance?
- A. D
- B. A
- C. C
- D. B
Answer: D
NEW QUESTION 76
Refer to the exhibit.
The routers in this network are all running EIGRP. What is the most important step to take in order to ensure that this network core will converge quickly should a link failure occur?
- A. add another link between the two routers with no servers and set the metric on this new link equal to the other four links
- B. make certain the maximum number of paths on both of the routers is two
- C. make certain EIGRP is running across all links
- D. make certain EIGRP is not running across non-transit links
Answer: D
NEW QUESTION 77
When developing an MVPN design, which performance and scalability consideration must be taken into account?
- A. multicast data sent to all PE routers on the default MDT
- B. CE end-to-end PIMadjacency establishment
- C. RP placement in the multicast VRF
- D. RP placement in the customer network
Answer: A
Explanation:
Section: Network Virtualization
Explanation/Reference:
NEW QUESTION 78 
Refer to the exhibit. You are asked to design this OSPF network to converge within 60 ms for unicast packets after a link topology changes due to a single link failure. Which technology can be enabled while conforming to the design requirements?
- A. Loop-Free Alternates
- B. IGP SPF- timer tuning
- C. BFD
- D. RSVP-TE Fast Reroute
- E. IGP neighbor timer tuning
Answer: C
Explanation:
Explanation
https://www.cisco.com/en/US/technologies/tk648/tk365/tk480/technologies_white_paper0900aecd80244005.htm
NEW QUESTION 79
Which two SAN designs appropriate to support large-scale SAN environments? (Choose two)
- A. Split fabric design
- B. Dual fabric design
- C. Edge-core-edge design
- D. Fibre Channel forwarder
- E. Core-edge design
Answer: C,E
NEW QUESTION 80
Refer to the exhibit.
Service Provider A and Service Provider B have agreed to a strategic interconnect relationship that will allow them access into each other's geographies by using an inter-AS eBGP VPNv4 multihop between route reflectors. Which two options will accomplish this scenario? (Choose two.)
- A. An LSP is formed between ASBR 1 and ASBR 2 using eBGP IPv4.
- B. An LSP is formed between ASBR 1 and ASBR 2 using eBGP VPNv4.
- C. RR 1 and RR 2 peer using multihop eBGP VPNv4 to exchange prefixes.
- D. ASBR 1 and ASBR 2 act as inline route reflectors that set themselves as the next-hop.
- E. RR 1 and RR 2 peer using multihop eBGP IPv4 to exchange prefixes.
Answer: A,C
NEW QUESTION 81
......
Who should take the 352-001 exam
CCDE Design Written 352-001 Exam certification is an internationally-recognized validation that identifies persons who earn it as possessing skilled as a CCDE Design. If a candidate wants significant improvement in career growth needs enhanced knowledge, skills, and talents. The CCDE Design Written 352-001 Exam certification provides proof of this advanced knowledge and skill. If a candidate has knowledge of associated technologies and skills that are required to pass CCDE Design Written 352-001 Exam then he should take this exam.
352-001 Exam Questions and Valid 352-001 Dumps PDF: https://passking.actualtorrent.com/352-001-exam-guide-torrent.html